Baijian Testing is a third-party testing agency that provides enterprises with relevant CNAS, CMA, CAL and other qualification certification testing reports. We always take the enterprise as the first and customer as the center, carry out testing work under strict procedures, provide customers with product testing and quality control solutions, and wholeheartedly provide scientific and scientific inspection, research and development analysis services for our customers
Testing cost: quoted based on customer needs and experimental complexity
Testing cycle: 3-15 working days (can be expedited)
Sample size: Select to send or visit according to sample size
Testing items:
Partial parameters, all items, some items, all parameters, fiber quality, 10% constant load elongation rate, dry heat shrinkage rate, tensile performance, width, unit area mass, width, square meter dry weight, elongation at break, adhesive strength, Breaking strength, breaking strength, uneven dry heat shrinkage, length, appearance quality, density
Testing standards:
1. GB/T 3923.1-2013 10% elongation under constant load
2. FZ/T13010-1998 Appendix C Synthetic Fiber Canvas for Rubber Industry
3. FZ/T13010-1998 Appendix E Synthetic Fiber Canvas for Rubber Industry
4. FZ/T13010-1998 Appendix F Synthetic Fiber Canvas for Rubber Industry
5. FZ/T01057.6-2007 Textile Fiber Identification Test Method Part 6: Melting Point Method (2014)
6. FZ/T13010-1998 Appendix B Synthetic Fiber Canvas for Rubber Industry
7. FZ/T13010-2018 Synthetic Fiber Canvas for Rubber Industry
8. FZ/T10003-2011 Test Methods for Canvas Fabrics
9. FZ/T13010-1998 Synthetic Fiber Canvas for Rubber Industry
10. GB/T3923.1-2013 Textiles - Part 1: Determination of Breaking Strength and Elongation at Break (Strip Method)
11. FZ/T 13010-20185.3 Appearance Quality
12 FZ/T 13010-1998 Synthetic Fiber Canvas for Rubber Industry
13. FZ/T 01057-2007 Fiber Qualitative
14. FZ/T 13010-2018/Appendix B Adhesive Strength
15. FZ/T 13010-1998 Appendix E Dry Heat Shrinkage
16. GB/T 2910-2009 Fiber Qualitative
17. FZ/T 13010-1998 Appendix F Unit Area Mass
18. FZ/T 13010-2018/Rubber Industry Synthetic Fiber Canvas Appendix B
19 FZ/T13010-1998 Appendix C Tensile Performance
20. FZ/T13010-1998 Appendix A Density
Testing and Testing Features:
1. The testing industry is fully covered, meeting different testing needs 2. Fully cover the laboratory and allocate localized testing nearby
3. Engineer one-on-one service to make testing more accurate
4. Free initial inspection, no testing fee charged for initial inspection
5. Self service ordering and express delivery for free on-site sampling 6. Short cycle, low cost, and thoughtful service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative, effective, and universally applicable domestically