How to handle textile product reports? The third-party testing agency of Baijian.com can provide customers with reporting and certification quality inspection services. Baijian.com has numerous cooperative laboratories, which provide authentic and effective reports and certifications, covering CNAS, CMA, CAL, etc. We provide you with relevant industry testing services

Report qualifications: CNAS, CMA, CAL, etc.

Testing costs: quoted based on customer needs and experimental complexity

Sample size: selected for sending or visiting based on sample size

Testing items:

Low temperature bending, heating expansion, tensile performance, partial parameters, all parameters, hot air aging, length/width/flatness/flatness, resistance to static loads.

, Durability performance (artificial climate accelerated aging), durability performance (hot air aging), tensile strength (high temperature 60 ℃), Elongation at break (Low temperature -20 ℃, tear strength, compression permanent deformation at room temperature and high temperature, elongation at break, impermeability, tensile strength, elongation at break, polymer waterproof membrane, tensile strength and elongation at break, low-temperature bending, composite strength, hardness, sheet size, length, width, flatness, drainage cross-sectional area, size, thickness, tensile strength at break, compressive performance, high-temperature flowability, tensile strength, sheet tensile performance, appearance quality, length) Degree, width, dimensional stability, volume expansion ratio, elongation at break, thickness, mass per unit area, hot air aging test, external dimensions, adhesive peel strength, adhesive peel strength, heat treatment ruler Size change rate, tensile properties of uniform, composite, self-adhesive, and point (strip) sheets, artificial climate aging, peel strength, adhesion, alkali resistance, ozone aging, specifications and dimensions, accelerated aging under artificial climate, adhesive peel strength (sheet to sheet), self-adhesive peel strength, peel strength at the bonding site of point (strip) sheets, heating expansion and contraction, and elongation at break, Artificial climate aging, elongation at break, elongation at break at room temperature, tensile strength at room temperature, tear performance, tensile strength/maximum tensile/tensile strength, low-temperature bending/low-temperature bending performance, elongation at break/elongation at maximum tensile strength/elongation at break, maximum tensile strength, elongation at tear, ozone aging/resistance to ozone cracking, brittle temperature, repeated immersion test, compression permanent deformation, hardness deviation, hardness (Shore A), Low temperature bending stability/low temperature bending, tear strength (right angle), tensile strength (tensile strength), (joint, bonding) peel strength, (right angle, trapezoidal) tear strength

Testing standards:

1. GB18173.1-2012 Polymer Waterproofing Materials Part 1: Sheet 6.3.2

2. GB/T 529-2008 Determination of tear strength of vulcanized rubber or thermoplastic rubber (pants, right angle, and crescent)

3 GB/T328.25-2007 Test Methods for Building Waterproof Rollers Part 25: Asphalt and Polymer Waterproof Rollers Resistance to Static Load

4. GB/T35609-2017 Green Product Evaluation Waterproof and Sealing Materials B.11.2.2

5. GB 18173.3-2014 Polymer Waterproof Materials Part 3: Water swelling Rubber Clause 6.3.7

6. GB 18173.1-2012/6.3.11 Polymer Waterproof Rollers Part 1: Sheet, Appendix D

7 GB/T 18173.1-2012 "Polymer Waterproofing Materials - Part 1: Sheet Materials" GB/T 18173.1-2012

8, GB 18173.4-2010 Polymer Waterproofing Materials - Part 4: Rubber Sealing Mats for Shield Tunnels

9, GB 18173.1-2012/6.1 Polymer Waterproofing Materials - Part 1: Sheet Materials

10, GB 18173.1-2012/6.3.5/Polymer Waterproofing Rolls - Part 1: Sheet Materials Appendix B

11 GB/T 328.25-2007 Test Methods for Building Waterproofing Rolls Part 25: Asphalt and Polymer Waterproofing Rolls Resistance to Static Load

12, GB/T 18173.1-2026.1 Sheet Size

13, GB/T 7759.1-2015 Vulcanized Rubber or Thermoplastic Rubber Determination of Compression Permanent Deformation Part 1: Under Normal and High Temperature Conditions

14 GB/T 529-200 "Determination of Tear Strength of Vulcanized Rubber or Thermoplastic Rubber (Pant, Right Angle, and Crescent Specimens)" GB/T 529-2008

15, GB18173.1-2012/Polymer Waterproofing Materials Part 1: Sheet Appendix B

16, GB/T 529-200 Determination of Tear Strength of Vulcanized Rubber or Thermoplastic Rubber (Pant, Right Angle, and Crescent Specimens) 8

17 GB/T 328.9-2007 | Test methods for building waterproofing membranes Part 9: Tensile properties of polymer waterproofing membranes

18, GB/T 531.1-2008 Vulcanized rubber or thermoplastic rubber indentation hardness test method Part 1: Shore hardness tester method

19, GB12952-2011 polyvinyl chloride (PVC) waterproofing membranes Article 6.6

20, GB/T 328.5-2007 Test methods for building waterproofing materials Part 5: Thickness of polymer waterproofing membranes Unit area quality

100% inspection process:

1. Telephone communication and confirmation of requirements 2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is required