Baijian Testing is mainly engaged in textile, insulation, cosmetics, food, hardware industry related product testing, as well as providing product certification services, but also in the broadening of the scope of the testing industry, the laboratory issued a report can be stamped CNAS/CMA/CAL qualification seal, the report is true and effective.
Report qualification: CNAS, CMA, CAL, etc
. Presentation style: electronic
version of the testing cycle: 3-15 working days (expedited can be expedited)
Testing cost: Quotation according to customer needs and experimental complexity
Sample size: Choose to send samples or visit the door according to the sample size
Scope
This standard specifies LED lamps (self ballasted
flow LED lamps) that integrate stable ignition components for general lighting in households and similar fields. This standard specifies safety and interchangeability requirements for this type of lamp, as well as test methods and conditions for checking its conformity
This standard is applicable to the following ranges:
- Rated power below 60 w;
- Rated voltage greater than 50 v but less than or equal to 250 v
- The lamp cap meets the requirements of Table 1 The requirements of this standard only involve type testing. The inspection methods for all products and batch products will be defined in Appendix C of GB 24819-2009
Note: The term "lamp" appearing in this standard represents "self ballasted LED lamp", unless otherwise specified as another type of lamp.
Normative reference documentsThe clauses in the following documents become clauses of this standard through reference in this standard. For dated reference documents, all subsequent modification orders (excluding corrected content) Neither the revised version nor the revised version is applicable to this standard. However, parties who have reached agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard GB 1312 Tubular Fluorescent Lamp Holders and Starter Holders (GB 1312-2007, IEC 60400: 2004, IDT)
GB/T 5169 10-2006 Fire hazard testing for electrical and electronic products - Part 10: Glow wire/hot wire basic test methods - Glow wire devices and general test methods (IEC 60695-2-10:2000, IDT)
GB/T 5169.11-2006 Fire hazard testing for electrical and electronic products - Part 11: Glow wire/hot wire basic test methods - Glow wire flammability test method for finished products (IEC 60695-2-11:2000,1DT)
GB/T 5169 12-2006 Fire hazard testing for electrical and electronic products - Part 12: Glow wire/hot wire basic test methods - Glow wire flammability test method for materials (IEC 60695-2-12:2000, IDT)
GB/T 5169 13-2006 Fire hazard testing for electrical and electronic products - Part 13: Glow wire/hot wire basic test methods - Glow wire ignition test method for materials (IEC 60695-2-13:2000, IDT)
GB 7000.1 Luminaires - Part 1: General requirements and tests (GB 7000 1-2007, IEC 60598-1:2003, IDT)
GB 14196.1 Safety requirements for incandescent lamps - Part 1: Tungsten filament lamps for household and similar general lighting purposes (GB 14196 1-2008, IEC 60432-1:2005, IDT)
GB 16843-2008 Safety requirements for single ended fluorescent lamps (IEC 61199:1999, IDT)
GB 19510.1 Lamp control gear Part 1: General and safety requirements (GB 19510 1 2009, IEC 61347-1:2007, IDT)
GB/T 24392 Method for Measuring Temperature Rise of Lamp Caps (GB/T 24392 2009, IEC 60360; 1998, IDT)
GB 24819 Safety Requirements for LED Modules for General Lighting (GB 24819-2009, IEC 62031:2008, IDT)
IEC 60061-1 Lamp Caps, Lamp Holders, and Gauges for Checking Their Safety and Interchangeability Part 1: Lamp Caps
IEC 60061-3 Lamp Caps Lamp holders and gauges for the inspection of their safety and interchangeability Part 3: Gauges
IEC 60529:1989 Degrees of protection provided by enclosures (IP code)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems100% inspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China100 inspection and testing process:
1. Telephone communication and confirmation of needs;
2. Recommend the plan and confirm the quotation;
3. Mailing samples and arranging testing;
4. Progress tracking and result feedback;
5. Issue reports and after-sales service;
6. If it needs to be expedited, priority processing;