This part of the scope GB/T 3386 specifies the methods for determining the performance of all electric and pneumatic analog drawing recorders operating with standardized signals for process control, including continuous marking and dotting recorders, as well as multi pen and multi point recorders. Some tests may not be applicable to all recorders, while certain types of recorders may require additional tests. The purpose of this section is to provide a unified test method for the performance evaluation of electric and pneumatic analog drawing recorders for process control using standardized signals. When it is not necessary to conduct a comprehensive evaluation according to this section, only the required tests can be conducted. The test results shall be included in the test report in accordance with the requirements of the relevant provisions of this section. The test report should clarify that the evaluation described in the report is not a comprehensive evaluation and indicate any omitted items. 2 Normative references: The clauses in the following documents become the clauses of this part through the reference of GB/T 3386. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions do not apply to this section. However, parties to agreements based on this section are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this section. GB/T 2900.56-2002 Electrotechnical Terminology Automatic Control (idt IEC 60050-351:1998) GB/T 18271.1-2000 General Performance Evaluation Methods and Procedures for Process Measurement and Control Devices Part I: General Gidt IEC 61298-1:1995) GB/T 18271.2-2000 General Performance Evaluation Methods and Procedures for Process Measurement and Control Devices Part 2: Tests under Reference Conditions (idt IEC 61298-2:1995) GB/T 18271.3-2000 General Performance Evaluation Methods and Procedures for Process Measurement and Control Devices, Part 3; Testing for the Influence of Influence Quantity (idt IEC 61298-3: 1998) GB/T 18271.4-2000 General Performance Evaluation Methods and Procedures for Process Measurement and Control Devices, Part 4: Content of Evaluation Reports (idt IEC 61298-4: 1995) IEC 61010-1:2001 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General Requirements IEC 61187:1993 Documentation of Electrical and Electronic Measurement Equipment
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China