Service details: This test is usually mainly used to simulate the free fall that the product may experience during rehandling, and to evaluate the product's ability to withstand unexpected impacts. Usually, the drop height is based on the weight of the product and the likelihood of falling as a reference standard. The falling surface should be a smooth, hard and rigid surface made of concrete or steel (if there are special requirements, it should be determined according to the product specifications or customer testing specifications). For different international standards, even if the product is under the same weight, the drop height is not the same. For handheld products (such as mobile phones, MP3 players, etc.), most drop heights range from 100cm-15201733840cm. IEC recommends that handheld products less than or equal to 2kg should have a drop height of 100cm that cannot be damaged. MIL suggests a drop height of 122cm for INTEL handheld products (such as mobile phones), and a drop height of 15201733840cm is recommended. The severity of the test depends on the height, frequency, and direction of the drop. We have professional instruments and experienced testing engineers, including compression testing machines, drop testing machines, and rupture testing machines. We can test the performance of packaging materials and provide the following testing services: 1. Packaging compression testing: To verify the ability of packaging materials of system products to resist stack pressure during transportation and storage. 2. Cardboard rupture test: Evaluate the ability of cardboard to resist the risk of puncture during transportation. 3. Drop test: Simulate the potential hazardous environment that the product may encounter during transportation, and evaluate the performance of the packaging material. 4. Tape Peel Test: Peel the tape at 90 or 180 degrees to evaluate its adhesive strength. 5. ISTA testing of packaging products: Packaging testing is a simulation of the damage that packaging products may experience during actual transportation due to various environmental factors such as vibration, pressure, drop, impact, temperature and humidity.
The above article is a partial list. For more testing needs and details, please consult the online consultant of the free consulting agency: 152 0173 3840 (phone and WeChat), conducting testing on over a hundred inspection websites - issuing authoritative testing reports has legal effect
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China